勤益科大機構典藏:Item 987654321/5797
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 2928/5721 (51%)
造访人次 : 376179      在线人数 : 891
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncut.edu.tw/handle/987654321/5797


    题名: Properties of magnetron-sputtered moisture barrier layer on transparent polyimide/graphene nanocomposite film
    作者: Mei-Hui Tsaia, Chi-Jung Changb, Horng-Hwa Luc, Yu-Fu Liaoa, I-Hsiang Tseng
    贡献者: 圖書館
    关键词: Transparent polyimide
    Graphene
    Water-vapor-transmission-rate
    Silicon nitride
    RF magnetron sputtering
    日期: 2013-10-01
    上传时间: 2016-10-13 15:24:16 (UTC+8)
    摘要: Colorless polyimides (PIs) have been considered as potential substrates for flexible displays due to their excellent transparency, thermal stability, mechanical strength and flexibility. However, high water vapor transmission rate (WVTR) of PI films limits the lifetime of electronic devices using PI films as substrates. Two approaches were applied to reduce the WVTR of PI films. Graphene (RG), which is thermally reduced graphene oxide (GO), was blended with a nearly colorless PI solution synthesized from an alicyclic tetracarboxylic dianhydride and aromatic diamine in cosolvent to obtain PI/RG nanocomposites. Subsequently, a barrier thin film was deposited on those PI nanocomposites by radio frequency magnetron sputtering from a Si3N4 target. The deposited barrier layer was amorphous and its composition along the thickness was homogeneous based on the X-ray diffraction patterns and the depth profile by X-ray photoelectron spectroscopy. An optimum deposition thickness of the barrier layer is 30 nm to obtain a close-packed, smooth and continuous barrier film on PI. The presence of a 30 nm-thick barrier layer on PI/RG-0.1 nanocomposite film capably reduces the WVTR to 0.17 g/m2-day compared to 181 g/m2-day for pure PI and 13 g/m2-day for PI/RG-0.1. The surface of PI/RG is more hydrophobic and the capacity of moisture absorption by PI/RG is lower than PI/GO indicating the water resistance by RG is superior to that by GO. This flexible nanocomposite film remains high optical clarity and simultaneously shows excellent water barrier performance, enhanced dimensional stability and sufficient mechanical strength for advanced electronic applications.
    關聯: Thin Solid Films
    显示于类别:[機械工程系(所)] 【機械工程系】期刊論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    Properties of magnetron-sputtered moisture barrier layer on transparent polyimide graphene nanocomposite film.pdf899KbAdobe PDF1237检视/开启


    在NCUTIR中所有的数据项都受到原著作权保护.


    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈