Properties of polyimide hybrids with mixed metal oxide

勤益科大機構典藏 > 工程學院 > 化工與材料工程系(所) > 【化工與材料工程系】博碩士論文 > Item 987654321/5806

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncut.edu.tw/handle/987654321/5806

题名:	Properties of polyimide hybrids with mixed metal oxide
作者:	Hsu-Tung Lu, Shih-Liang Huang, I-Hsiang Tseng, Yin-Kai Lin andMei-Hui Tsai
贡献者:	圖書館
关键词:	polyimide sol–gel hybrid mixed metal oxide thermal propertie refractive index
日期:	2013-01-05
上传时间:	2016-10-13 16:02:03 (UTC+8)
摘要:	Polyimide/silica–titania (PI/SiO2–TiO2) hybrid films were prepared via an in situ sol–gel process. The PI precursor, poly(amic acid) (PAA), which contains 2,2'-bis[4-(4-aminophenoxy)-phenyl]propane (p-BAPPP), 3,3',4,4'- benzophenetetracarboxylic anhydride (BTDA) and 3-aminopropyltrimethoxysilane (APrTMOS), was first synthesized; this was followed by the addition of phenyltrimethoxysilane (PTMS) and/or tetraethyl orthotitanate (Ti(OEt)4) to fabricate PI/SiO2–TiO2 films. The relative content of SiO2 to TiO2 has remarkable effects on the crosslink structure and resultant properties of the hybrids. XPS results confirm that the amount of Si on the surface of the hybrids is higher than that in the bulk. The distribution of Ti in the hybrid films is contrary to the above trend because of the formation of three-dimensional Si[BOND]O[BOND]Si, Si[BOND]O[BOND]Ti, and Ti[BOND]O[BOND]Ti networks. The SiO2 content of the hybrids containing only silica significantly affects their refractive index, contact angle, and dielectric constant. The films with added PTMS show higher contact angles than pure PI because nonpolar segments, [BOND]C2H6 or benzene groups, tend to distribute on the surface. Upon the addition of (Ti(OEt)4), some hydrophilic segments on the surface of the hybrids are induced because of the formation of a crosslinked structure. The denser crosslinked molecular structure, and consequently lower CTE and higher Tg are obtained from hybrids containing more TiO2. By comparing the above properties and flexibility, the best composition of metal oxides (SiO2/TiO2) in hybrids is 20/80. That is, an optimum ratio of metal oxides in PI hybrids induces superior properties for advanced practical applications.
關聯:	Journal of Applied Polymer Science
显示于类别:	[化工與材料工程系(所)] 【化工與材料工程系】博碩士論文

文件中的档案:

没有与此文件相关的档案.

检视Licence

在NCUTIR中所有的数据项都受到原著作权保护.

数据加载中.....