勤益科大機構典藏:Item 987654321/5824
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 2928/5721 (51%)
造访人次 : 373549      在线人数 : 135
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧：
  • 您可在西文检索词汇前后加上"双引号"，以获取较精准的检索结果
  • 若欲以作者姓名搜寻，建议至进阶搜寻限定作者字段，可获得较完整数据
    •  进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncut.edu.tw/handle/987654321/5824


    题名: Comparison of Injection Molding Process Windows for Plastic Lens Established by Artificial Neural Network and Response Surface Methodology
    作者: Kuo-Ming Tsai, Hao-Jhih Luo
    贡献者: 圖書館
    关键词: Process window
    Injection molding
    Optical lens
    Artificial neural network (ANN)
    Response surface methodology (RSM)
    日期: 2015-04
    上传时间: 2016-10-14 09:44:34 (UTC+8)
    摘要: This study used artificial neural network (ANN) and response surface methodology (RSM) to obtain the lens form accuracy prediction model. Moreover, it established the operating parameter region that satisfies the designated lens form accuracy at a minimum cost. Finally, experimental verification and accuracy comparison were conducted. This study used the Taguchi method for parameter screening experiment in the injection molding process. The obtained significant factors that influence form accuracy of the lens were mold temperature, cooling time, and packing time. Those significant factors were used for full factorial experiment, for adjusted experiment using composite central design method, and to establish the process window. According to the results, the process window for injection molding using an ANN to establish cooling time and packing time was a high-order, irregular shape, whereas the one established by a RSM was oblique oval. The optimal form accuracy of the lens obtained from ANN model was better than that from RSM model. The result of the experiment indicated that the process window of the injection molding process for optimal form accuracy obtained from both ANN and RSM models is quite consistent. In addition, a case study for a form accuracy of 0.5 μm was discussed. The process window established by ANN had a better accuracy and wider range than that by RSM.
    關聯: The International Journal of Advanced Manufacturing Technology
    显示于类别:[機械工程系(所)] 【機械工程系】期刊論文

    文件中的档案:

    没有与此文件相关的档案.



    检视Licence

    在NCUTIR中所有的数据项都受到原著作权保护.

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈