勤益科大機構典藏:Item 987654321/5825
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 2928/5721 (51%)
造訪人次 : 387001      線上人數 : 465
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧：
  • 您可在西文檢索詞彙前後加上"雙引號"，以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋，建議至進階搜尋限定作者欄位，可獲得較完整資料
    •  進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncut.edu.tw/handle/987654321/5825


    題名: Correlation between Runner Pressure and Cavity Pressure within Injection Mold
    作者: Kuo-Ming Tsai, Jun-Kai Lan
    貢獻者: 圖書館
    關鍵詞: Injection molding
    Cavity pressure
    Form accuracy
    Runner design
    日期: 2015-07
    上傳時間: 2016-10-14 09:47:03 (UTC+8)
    摘要: Cavity pressure in the injection molding process is closely related to the quality of the molded products and is used for process monitoring and control to upgrade the quality of molded products. However, the sensor installed inside the cavity makes the molded product of the cavity defective, reducing productivity. In view of this, this study investigates the correlation between melt pressure and cavity pressure in different runner positions and determines the appropriate runner position, where the runner pressure can represent the cavity pressure, in order to increase productivity. First, the Taguchi method is used to obtain the optimal parameter combination of injection molding, and then, the experiment is conducted based on this condition in order to discuss the difference between runner and cavity pressure history profiles. According to the experimental results, the quality of molded products can be monitored and controlled by installing sensors at different runner positions, and the maximum value of the cavity pressure profile varies with the runner position. When the distance between the top of the pressure sensor mounted in the secondary runner and the outside diameter of the runner is greater than the maximum thickness of the molded product, the obtained pressure history profile approximates to that inside the cavity. In other words, the runner pressure can represent the cavity pressure. Mold temperature significantly influences the runner pressure history profile and form accuracy (contour precision) of the lens during the injection molding process, which can be used as a process monitoring and control parameter. In addition, the cavity pressure profile at the cooling stage is closely related to the form accuracy of the lens and is the key to determining process monitoring and control parameter.
    關聯: The International Journal of Advanced Manufacturing Technology
    顯示於類別:[機械工程系(所)] 【機械工程系】期刊論文

    文件中的檔案:

    沒有與此文件相關的檔案.



    檢視Licence

    在NCUTIR中所有的資料項目都受到原著作權保護.

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回饋