HYGROSCOPIC EFFICIENCY ANALYSIS OF DESICCANT COATING HEAT EXCHANGERS WITH DIFFERENT SOLID DESICCANTS

勤益科大機構典藏 > 工程學院 > 機械工程系(所) > 【機械工程系】期刊論文 > Item 987654321/5994

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncut.edu.tw/handle/987654321/5994

题名:	HYGROSCOPIC EFFICIENCY ANALYSIS OF DESICCANT COATING HEAT EXCHANGERS WITH DIFFERENT SOLID DESICCANTS
作者:	駱文傑
贡献者:	精密製造科技研究所博士班
日期:	2015
上传时间:	2017-09-26 10:08:47 (UTC+8)
摘要:	This study used desiccants of silica gel and sodium polyacrylate coated on fin and tube heat exchangers to enhance the absorption of water vapor in the air. The experimental results show that, while the temperature and relative humidity of the inlet air are 25°C and 85% RH, respectively, the vapor absorbent capacities of the two desiccants are better than that with the conventional method under different inlet air temperatures. The enhanced dehumidification efficiencies of sodium polyacrylate and silica gel are 64% and 42.8%, respectively, as compared to that of the conventional cooling and dehumidification method. The two desiccant coating heat exchangers are also operated periodically in mass equilibrium states between the absorption and regeneration processes. While hot water of 60°C was supplied for the regeneration process, after reaching an equilibrium state in periodic cycles, the average vapor absorption rates per unite desiccant are 0.0018g<inf>vapor</inf>(g min) for silica gel and 0.004g<inf>vapor</inf>/(g min) for sodium polyacrylate. For the desiccant of sodium polyacrylate, the period of absorption process could be much longer, and the vapor could be discharged in a shorter period in the regeneration process. Thus, the dehumidification efficiency of sodium polyacrylate in DCHE has much better performance than that of silica gel. (10 refs)
關聯:	Journal of Technology
显示于类别:	[機械工程系(所)] 【機械工程系】期刊論文

文件中的档案:

没有与此文件相关的档案.

检视Licence

在NCUTIR中所有的数据项都受到原著作权保护.

数据加载中.....