English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 2928/5721 (51%)
造訪人次 : 373153      線上人數 : 18
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncut.edu.tw/handle/987654321/6002


    題名: Effect of PMMA and Graphene Addition on the Performances of Organic Solar Cells
    作者: 歐珍方
    貢獻者: 化工與材料工程系
    日期: 2013-08
    上傳時間: 2017-09-26 13:18:57 (UTC+8)
    摘要: Poly(3-hexylthiophene) (P3HT) is a wide application in active layer of solar cell. It is a soluble conductive polymer but their mechanical properties are poor and its conductivity is unstable in environmental condition. We add polymethylmethacrylate (PMMA) into active layer to overcome these disadvantages. We investigated the effect of adding PMMA and graphene into solar cell on its characteristics of polymer solar cell. The cell structure was ITO/PEDOT:PSS/P3HT:PCBM:PMMA/Ca/Al. The 0.02, 0.04 and 0.06 weight ratio of PMMA were added into the P3HT:PCBM (1:1 ratio by weight) active layer. The device with 0.04 PMMA exhibits the highest short circuit current density (Jsc, 9.01 mA/cm2) and power conversion efficiency (PCE, 3.39%). The increases of Jsc and PCE are 26.5% and 49.3%, respectively compared with the device based on the pristine P3HT:PCBM active layer giving Jsc and PCE of 7.12 mA/cm2 and 2.27%. Graphene exhibits good electron conductivity, thermal conductivity, chemical stability and strength. We investigated the effect of inserting graphene between hole transfer layer (HTL) of poly(ethylene dioxythiophene) (PEDOT)-polystyrene sulfonic acid (PSS) (PEDOT:PSS) and active layer on the characteristics of polymer solar cell. The cell structure was ITO/PEDOT:PSS/Graphene/P3HT:PCBM:PMMA/Ca/Al. The concentration of graphene solution was 2.2 mg/ml and the graphene layer was coated by spin-coating at 6000 rpm and the weight ratio of PMMA in the P3HT:PCBM active layer was 0.04. The Jsc of device was increased to 9.45 mA/cm2, an increase of 32.7%. The PCE of the device was increased to 3.63%, an increase of 59.9%. © (2013) Trans Tech Publications, Switzerland. (9 refs)
    關聯: Advanced Materials Research
    顯示於類別:[化工與材料工程系(所)] 【化工與材料工程系】期刊論文

    文件中的檔案:

    沒有與此文件相關的檔案.



    在NCUTIR中所有的資料項目都受到原著作權保護.


    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回饋