To Develop a Parallel Processing System with the FPGA for Multi-Axis Motion Control Platform

勤益科大機構典藏 > 電資學院 > 電機工程系(所) > 【電機工程系所】期刊論文 > Item 987654321/6065

請使用永久網址來引用或連結此文件: http://ir.lib.ncut.edu.tw/handle/987654321/6065

題名:	To Develop a Parallel Processing System with the FPGA for Multi-Axis Motion Control Platform
作者:	賴秋庚
貢獻者:	電機工程(學)系
日期:	2013-01
上傳時間:	2017-09-27 11:02:56 (UTC+8)
摘要:	It is known that the flexibility and programmable abilities have made the FPGA widely used as controllers to the electrical machines and systems. Above all, the high density of recent developed chip results in many of the CPU cores and complicated hardware can be programmed into the chip to be as controller. Thus, this topic is based on the currently available technologies of FPGA-based system design to the parallel processing. Software and hardware co-design are shown to reach the performance, and the system’s software stream data are processed with the hardware parallel technique. This analysis enables FPGA-based control system on the parallel computing platform to achieve the simultaneous operation for 3-axis motor motion and drive system control. In that way, we chose the high density FPGA, Altera Cyclone II EP2C8Q208C8N, as the chip to develop the hardware of microprocessor, motor drive and motion controller. The developed system was practically applied to a 3-axis motion platform driven by stepping motors to evaluate the system performance.
關聯:	Applied Mechanics and Materials
顯示於類別:	[電機工程系(所)] 【電機工程系所】期刊論文

文件中的檔案:

沒有與此文件相關的檔案.

檢視Licence

在NCUTIR中所有的資料項目都受到原著作權保護.