勤益科大機構典藏:Item 987654321/6267
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 2928/5721 (51%)
造访人次 : 375887      在线人数 : 601
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧：
  • 您可在西文检索词汇前后加上"双引号"，以获取较精准的检索结果
  • 若欲以作者姓名搜寻，建议至进阶搜寻限定作者字段，可获得较完整数据
    •  进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncut.edu.tw/handle/987654321/6267


    题名: Analysis of the machining stability of a milling machine considering the effect of machine frame structure and spindle bearings: experimental and finite element approaches
    作者: 洪瑞斌
    贡献者: 機械工程(學)系
    日期: 2013-10
    上传时间: 2017-10-02 10:47:51 (UTC+8)
    摘要: Chatter vibration has been a troublesome problem for a machine tool toward the high precision and high-speed machining. Essentially, the machining performance is determined by the dynamic characteristics of the machine tool structure and dynamics of cutting process of spindle tool. Prediction of the dynamic behavior at spindle tool tip is therefore of importance for assessing the machining stability of a machine tool at design stage. This study was aimed to evaluate the machining stability of a vertical milling system under the interactive influence of the spindle unit and the machine frame structure. To this end, a realistic finite element model of a vertical milling tool was generated by incorporating the spindle-bearing model into the head stock mounted on machine frame. The influences of the dynamics of spindle-bearing system and the machine frame structure were investigated respectively. Current results show that the machine tool spindle system demonstrates different dynamic behaviors at different frequency ranges, which are also characterized as structural modes and spindle modes, respectively. In particular, the maximum compliance of spindle tool tip was found to occur at the bending vibrations of spindle shaft and vary with the preload amount of spindle bearing. The machining stabilities were predicted to different extent, depending on the exciting modes which could be related to the influences of machine frame and spindle unit.
    關聯: International Journal of Advanced Manufacturing Technology
    显示于类别:[機械工程系(所)] 【機械工程系】期刊論文

    文件中的档案:

    没有与此文件相关的档案.



    检视Licence

    在NCUTIR中所有的数据项都受到原著作权保护.

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈