Six Sigma Approach to Improve Surface Precision of Optical Lenses in the Injection-Molding Process

勤益科大機構典藏 > 工程學院 > 機械工程系(所) > 【機械工程系】期刊論文 > Item 987654321/6580

請使用永久網址來引用或連結此文件: http://ir.lib.ncut.edu.tw/handle/987654321/6580

題名:	Six Sigma Approach to Improve Surface Precision of Optical Lenses in the Injection-Molding Process
作者:	蔡國銘
貢獻者:	機械工程(學)系
日期:	2009-05
上傳時間:	2017-11-01 14:10:17 (UTC+8)
摘要:	The main objective of this study is to improve the quality of injection-molded lenses with the implementation of DMAIC procedures based on the Six Sigma approach. At first, critical-to-quality factors (CTQ) are determined according to customer requirements for quality. The causal factors for the lens properties are identified within the processing window being tested. Adopted for the analysis procedures, the Taguchi design-of-experiment method (DOE) is employed for screening pertinent process parameters in the injection process. After completing the DOE procedures, confirmation experiments are conducted with selected combinations of factors and levels. The experimental results show substantial improvement for the profile accuracy on molded lenses. As a further step, an optimal set of factors and levels are taken during the mass-production processing conditions. In conclusion, the Six Sigma approach can effectively improve the upper process capability index CPU from 0.57 to 1.75, i.e., 0.07 defects per million, without an upgrade of production equipment or an increase of production costs.
關聯:	International Journal of Applied Management and Technology
顯示於類別:	[機械工程系(所)] 【機械工程系】期刊論文

文件中的檔案:

沒有與此文件相關的檔案.

檢視Licence

在NCUTIR中所有的資料項目都受到原著作權保護.