IMPROVED MODEL OF RECTANGULAR SCRATCH DRIVE ACTUATOR

勤益科大機構典藏 > 工程學院 > 機械工程系(所) > 【機械工程系】期刊論文 > Item 987654321/6622

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncut.edu.tw/handle/987654321/6622

题名:	IMPROVED MODEL OF RECTANGULAR SCRATCH DRIVE ACTUATOR
作者:	陳雄章
贡献者:	機械工程(學)系
日期:	2011-03
上传时间:	2017-11-14 10:25:18 (UTC+8)
摘要:	This paper proposes an integrated model of a scratch drive actuator (SDA) based on a fourth-order governing equation of the Euler-Bernoulli theory. By solving this equation with proper boundary conditions, typical SDA output characteristics, such as noncontact length, priming voltage, deflection curve, output force, and bending stress, can be determined. The results of the output force in a static model are then used as the input of single degree-of-freedom dynamic SDA model to investigate the friction effect. Electroplated nickel SDA arrays, 80 μm in main beam length and 65 μm in width with a suspended spring, are fabricated and tested. The average travel distances after 1500 input pulses of 80-120 V are measured and found to be from 4.7 to 12.9 μm. The average measured output forces are from 10.2 to 28.3 μN. The simulation from the dynamic model is closer to the measured total travel distance and the output force than the static model, in general. The difference between simulations and experimental data due to energy dissipation can be reduced by including the friction effect in the dynamic model. Deviations between simulations and measured results are less than 10% in full range showing the superior capability of the proposed SDA model.
關聯:	Journal of Microlithography, Microfabrication, and Microsystems
显示于类别:	[機械工程系(所)] 【機械工程系】期刊論文

文件中的档案:

没有与此文件相关的档案.

检视Licence

在NCUTIR中所有的数据项都受到原著作权保护.

数据加载中.....