Effect of Silanes on the Morphology, Hydrophobicity and Dynamical Mechanical Properties of Polyimide/Silica Hybrid Membranes

勤益科大機構典藏 > 工程學院 > 化工與材料工程系(所) > 【化工與材料工程系】期刊論文 > Item 987654321/6638

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncut.edu.tw/handle/987654321/6638

题名:	Effect of Silanes on the Morphology, Hydrophobicity and Dynamical Mechanical Properties of Polyimide/Silica Hybrid Membranes
作者:	陳秋菊
贡献者:	化工與材料工程系
日期:	2011-05
上传时间:	2017-11-14 13:55:13 (UTC+8)
摘要:	Polyimide (PI)/silica hybrid membranes with high contact angles were prepared through the in situ sol–gel process. The precursor, poly(amic acid) with controlled block chain length, was synthesized using 4,4′-diaminodiphenyl ether (ODA), 3,3′,4,4′-benzophenone-tetracarboxylic dianhydride (BTDA) and 3-aminopropyl-trimethoxysilane (APrTMOS) or 3-aminopropyldimethylethoxysilane (APDiMOS). And then, phenyltrimethoxysilane (PTS) or tetramethoxysilane (TMOS) or methyltrimethoxysilane (MTrMOS) was respectively, added to the above polyamic acid and mixed thoroughly. Following curing reaction, the PI/silica hybrid membranes with different cross-linkages, silica content, and hydrophobic properties were prepared. The effect on the formation of PI imide ring during imidization reaction is increased as the increase of silanes content and characterized by frequency shiftment and absorbance ratio of Fourier transform infrared (FTIR) measurements. All the hybrid membranes show high transparency though with high silica contents. The storage modulus, tan δ, and damping intensity by DMA measurements are all correlated with silane content or block chain length. And all these membranes with silane content possess high contact angle as compared to pure PI without any silanes added and the contact angles increase with increasing the silane content. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011
關聯:	Journal of Applied Polymer Science
显示于类别:	[化工與材料工程系(所)] 【化工與材料工程系】期刊論文

文件中的档案:

没有与此文件相关的档案.

检视Licence

在NCUTIR中所有的数据项都受到原著作权保护.

数据加载中.....