勤益科大機構典藏:Item 987654321/6995
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 2928/5721 (51%)
造访人次 : 386401      在线人数 : 286
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧：
  • 您可在西文检索词汇前后加上"双引号"，以获取较精准的检索结果
  • 若欲以作者姓名搜寻，建议至进阶搜寻限定作者字段，可获得较完整数据
    •  进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncut.edu.tw/handle/987654321/6995


    题名: Properties of Polyimide Hybrids with Mixed Metal Oxide
    作者: 呂旭東
    贡献者: 化工與材料工程系
    日期: 2012-01
    上传时间: 2017-12-19 10:16:37 (UTC+8)
    摘要: Polyimide/silica–titania (PI/SiO2–TiO2) hybrid films were prepared via an in situ sol–gel process. The PI precursor, poly(amic acid) (PAA), which contains 2,2'-bis[4-(4-aminophenoxy)-phenyl]propane (p-BAPPP), 3,3',4,4'- benzophenetetracarboxylic anhydride (BTDA) and 3-aminopropyltrimethoxysilane (APrTMOS), was first synthesized; this was followed by the addition of phenyltrimethoxysilane (PTMS) and/or tetraethyl orthotitanate (Ti(OEt)4) to fabricate PI/SiO2–TiO2 films. The relative content of SiO2 to TiO2 has remarkable effects on the crosslink structure and resultant properties of the hybrids. XPS results confirm that the amount of Si on the surface of the hybrids is higher than that in the bulk. The distribution of Ti in the hybrid films is contrary to the above trend because of the formation of three-dimensional Si[BOND]O[BOND]Si, Si[BOND]O[BOND]Ti, and Ti[BOND]O[BOND]Ti networks. The SiO2 content of the hybrids containing only silica significantly affects their refractive index, contact angle, and dielectric constant. The films with added PTMS show higher contact angles than pure PI because nonpolar segments, [BOND]C2H6 or benzene groups, tend to distribute on the surface. Upon the addition of (Ti(OEt)4), some hydrophilic segments on the surface of the hybrids are induced because of the formation of a crosslinked structure. The denser crosslinked molecular structure, and consequently lower CTE and higher Tg are obtained from hybrids containing more TiO2. By comparing the above properties and flexibility, the best composition of metal oxides (SiO2/TiO2) in hybrids is 20/80. That is, an optimum ratio of metal oxides in PI hybrids induces superior properties for advanced practical applications. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013
    關聯: Journal of Applied Polymer Science
    显示于类别:[化工與材料工程系(所)] 【化工與材料工程系】期刊論文

    文件中的档案:

    没有与此文件相关的档案.



    检视Licence

    在NCUTIR中所有的数据项都受到原著作权保护.

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈