工程塑膠增韌環氧樹脂之破壞特性

勤益科大機構典藏 > 其他校內單位 > 勤益科技大學 > 勤益學報 > Item 987654321/1938

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncut.edu.tw/handle/987654321/1938

题名:	工程塑膠增韌環氧樹脂之破壞特性
作者:	施文昌 Shih, Wen-Chang
贡献者:	化學工程系 Department of Chemical Engineering
关键词:	工程塑膠;環氧樹脂
日期:	1993-12
上传时间:	2008-12-05 10:25:58 (UTC+8)
出版者:	勤益科技大學
摘要:	本文主要探討工程塑膠PC，Phenoxy及blocked PU增韌環氧樹脂之破壞機構當改變工程塑膠含量時，會呈現不同之裂縫圖形；且增韌的程度受基材與環氧樹脂的相容性，形成之粒子大小及基材的特性等所影響。從動態實驗中，我們發現在環氧樹脂中含有10phr的blocked PU或10phr的Phenoxy展現較佳的增韌效果，而PC增韌環氧樹脂則無顯著的變化。從靜態實驗中，我們也觀察到15phr的blocked PU或10phr的PC展現較佳的增韌結果，但Phenoxy增韌環氧樹脂則無顯著的影響，此外，我們也藉SEM照片觀察增韌機構中的破壞形態。 The fracture properties of toughenes epoxy by Phenoxy, Polycarbonate and blocked NCO-terminated PU prepolymer were studied. The toughening mecha-nism of the system was investigated. Different crack patterns were observed on specimens of different plastic contents. The toughness of a toughened material is affected by the amount of particles, the miscibility of particle and matrix material, and the property of matrix material. Under dynamic condition, the epoxy resin containing 10 phr blocked NCO-terminated PU prepolymer or 10 phr Phenoxy showed good toughness. On the other hand, the effect of adding Polycarbonate on toughness of epoxy resin is insignificant. Under quasi-static condition, the best toughening result of resin by adding blocked NCO-terminated PU prepolymer and Polycarbonate was obtained at 15 phr and 10 phr separately, and the toughening effect is insignificant by adding Phenoxy in epoxy. The toughening mechanism was investigated by examining the fracture morphology with SEM photographs.
關聯:	勤益學報 No.11 p.83-91
显示于类别:	[勤益科技大學] 勤益學報

文件中的档案:

档案	描述	大小	格式	浏览次数
工程塑膠增韌環氧樹脂之破壞特性.pdf		1106Kb	Adobe PDF	2685	检视/开启

在NCUTIR中所有的数据项都受到原著作权保护.

数据加载中.....