勤益科大機構典藏:Item 987654321/6739
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 2928/5721 (51%)
造訪人次 : 387331      線上人數 : 91
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧：
  • 您可在西文檢索詞彙前後加上"雙引號"，以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋，建議至進階搜尋限定作者欄位，可獲得較完整資料
    •  進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncut.edu.tw/handle/987654321/6739


    題名: An Analytical Study on Influence of Movement Conditions of Ultrasonic Atomizing Nozzle on Performance of Spray Coating
    作者: 吳友烈
    貢獻者: 冷凍空調與能源系
    日期: 2011-03
    上傳時間: 2017-11-29 09:49:12 (UTC+8)
    摘要: This study aimed to make the slurry droplets atomized by the ultrasonic atomization spray coating diversion system fall on the substrate surface of hot plate stably, instead of rebound or spill due to overly high pressure or speed that causes material waste and excessive or non-uniform spray coating. The lateral movement distance of the nozzle influences the uniformity of film thickness distribution, while the lateral movement distance influences the film uniformity and the spray coating efficiency; these two are important parameters to the efficiency of ultrasonic spraying equipments. Therefore, this study conducted a simulation analysis on the atomization flow field of ultrasonic atomization diversion systems, where the distribution of atomization flow field was analyzed at different lateral movement distances of the nozzle. By evaluating the performance of thin film coating, this study attempted to find out the optimal lateral movement distance of ultrasonic precision spray coating. The simulation analysis results were tested on a real machine for validation in order to identify the reliability of the simulation. The simulation result showed that the central part of the film in the position sprayed was thicker; therefore, the nozzle moved 1 cm horizontally at 0.1m/s to thicken the repeatedly sprayed area to improve the overall uniformity of the panel. The study analyzed the spray coating thicknesses according to 16 monitoring points in the repeatedly sprayed area on the panel. According to the thicknesses of the monitoring point positions, when the area that had been sprayed once was sprayed again by the nozzle moving 1cm laterally, the uniformity of overall film on the overall panel was improved significantly.
    關聯: Applied Mechanics and Materials
    顯示於類別:[冷凍空調與能源系(所)] 【冷凍空調與能源系】期刊論文

    文件中的檔案:

    沒有與此文件相關的檔案.



    檢視Licence

    在NCUTIR中所有的資料項目都受到原著作權保護.

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回饋